New Features

1. Display the number of pre-added scanned devices and online devices in the group; synchronously count the number of 

devices during network configuration.

2. Add exclusive icons and quantity indicators for online/offline devices, making status visualization clearer.

Function Optimizations

1. Updated power calculation logic: Calculated using the formula 「Brightness × Maximum Power × Max Trim」.

2. Reduced frequent Building refreshes to improve page loading smoothness.

3. Simplified device management operations: Hidden the single-device network withdrawal function (only retained 

deletion), and unified the group network withdrawal function as deletion.

4. Automatically disconnect when the relay replies with 0 devices after network configuration to avoid invalid connections 

occupying resources.

5. Directly load the gateway password setting interface after clearing the WiFi settings of the floor plan gateway.

Bug Fixes

1. Fixed abnormal unicast network configuration issues to ensure device addition success rate.

2. Optimized the page return logic after creating a Building to improve operational coherence.

1. Display the number of pre-added scanned devices and online devices in the group; synchronously count the number of 

2. devices during network configuration.

3. Add exclusive icons and quantity indicators for online/offline devices, making status visualization clearer.

Function Optimizations

1. Updated power calculation logic: Calculated using the formula 「Brightness × Maximum Power × Max Trim」.

2. Reduced frequent Building refreshes to improve page loading smoothness.

3. Simplified device management operations: Hidden the single-device network withdrawal function (only retained deletion),

 and unified the group network withdrawal function as deletion.

4. Automatically disconnect when the relay replies with 0 devices after network configuration to avoid invalid connections

 occupying resources.

5. Directly load the gateway password setting interface after clearing the WiFi settings of the floor plan gateway.

Bug Fixes

1. Fixed abnormal unicast network configuration issues to ensure device addition success rate.

2. Optimized the page return logic after creating a Building to improve operational coherence.

New Features

1. Color temperature manual input; single-device control with CCT adjustment, on/off and dimming.

2. Single-device control: added pagination & classified group transfer; all nodes support list/icon view switching.

3. Group control (DH mode): added brightness slider and color temperature display.

4. Beta: OTA auto-upgrade (auto firmware selection); batch OTA supports appO (future firmware integration).

5. Share QR codes savable; admin/regular user permission distinction (regular users: no Area/Zone/Group modification).

6. New accounts: auto-create default Building + linked Area/Zone/Group/scenes.

7. Scan to import devices; device list auto-retrieves online status.

Bug Fixes

1. Fixed group deletion crash, Mesh switching jump, group control auto-light-on issues.

2. Resolved GATT false connection, Bluetooth-off auto-connection error, QR code invalid data freeze.

3. Corrected measurement table display errors, eye icon loss/abnormal display; ensured data loading/export accuracy.

4. Fixed expired QR code no prompt, unexpected interface refresh from relay responses after 3s.

Function Optimizations

1. Retain local Profile data on secondary login with the same account (no automatic deletion)

2. Adjust auto-connection priority: Prefer gateway connection over remote controller

3. Optimize Profile auto-upload timing: Trigger upload 30 seconds after important operations

4. Delete local device data when switching Areas to avoid residual devices in other Areas (reduces offline availability)

5. Optimize logic code for measurement and emergency devices (including daily schedules and scene node tables)

6. Disable Profile upload during Zone/Group on/off dimming operations

7. Add refresh function in power list: Sync status via refresh after load fault resolution

8. Add pop-up loading prompts when switching Areas/Meshes to improve operation perception

9. Support uploading floor plans and avatars; sync measurement switch status with single-device onLineStatus

Bug Fixes

1. Fixed issues: Unlocked interface during power interface refresh, abnormal display of power table, and redundant slider in power info interface

2. Corrected inconsistency between measurement switch status and actual brightness

3. Fixed navigation bar upward shift when adding Zones

4. Resolved issue of allowing operations without selecting Building/Area

Function Optimizations

1. Update default settings: Adjust warehouse parameter HoldTime to 10 minutes (set as default group parameter)

2. Support duplicate Group names across different Zones; rename validation only checks uniqueness within the same Zone (max 15 characters)

3. Real-time refresh of online status on all node interfaces; mesh renaming synced to server

4. Sync Building CRUD operations with server data when red light alarm is active

5. Organize global text for consistent expression

Bug Fixes

1. Fix app crashes caused by double-clicking when switching Buildings, rapid tab switching, and entering group interfaces

2. Resolve issues including incorrect Group access, Group cross-Zone interference, duplicate Zone/Group IDs during creation, and abnormal deletion counts

3. Correct parameter chaos from brightness input exceeding 100% and failure to save minLum settings

1. Automatic Area refresh and data refresh when entering the Building interface.
2. Profile encryption.
3. Auto-connection optimization.
4. Re-enable auto-connection when switching Buildings.
5. Implemented device manufacturing date viewing (requires new firmware upgrade).
6. Refresh node indicators on the network configuration interface.
7. Fixed inaccurate Lux value display and resolved Group data desynchronization issues.

2. Remove default area groups to avoid conflicts between areas with the same name and group identifiers across multiple buildings;

3. Add comments to received operation codes to improve code readability;

4. Add overview display for daily schedules and scenes.

1. Optimize the renaming interface style
2. Adjust the style of the QR code sharing and download button
3. Refine the visual style of the renaming box and loading box
4. Adjust node sorting rule: Offline devices are displayed first
5. Set the minimum value of the 3rd gear color temperature to 2700K
6. Support long-pressing group presets to view details
7. Optimize the slider interaction and style on the group control interface
8. Temporarily pull one area by default when scanning new devices to build a network (temporary logic)

1. Modify default group number assignment
2. Release database D to obtain configuration file object; remove auto-connection pop-up
3. Add default area to regions
4. Rename dialog boxes for areas and regions
5. Sync numeric selector on group control interface
6. Add password reset interface; optimize login/registration interfaces

1. Add password reset interface; optimize login and registration interfaces
2. Add a default Group when creating a new Area/Zone
3. Remember account and password (auto-save credentials)
4. Group control parameter selector requires Confirm to issue commands
5. The Group page remains non-empty unless the user deletes the last Group in the Zone
6. Devices refresh normally during network configuration in other Areas

New Features

1. Add scene QR code scanning function to simplify the quick scene activation process

2. Support grid and zone deletion operations for enhanced configuration flexibility

3. Introduce new grid identification; grid keys support random generation to strengthen security

Function Optimizations

1. Optimize scanning strategy (frequency reduction) to reduce APP lag

2. Add device group transfer rollback function for quick recovery from misoperations

3. Improve the display logic of the weight measurement table; disable virtual group issuance for groups to enhance control stability

Bug Fixes

1. Resolve the issue of failed re-addition via QR code after device deletion

2. Correct the parsing error of emergency device detection results to ensure data accuracy

1. For debugging: Fix meshID, random number, and currentTime
2. Area selection order
3. Permission jump/navigation
4. Improve weekly schedule interface
5. Schedule and virtual group mesh activation/deactivation
6. Adjust standby period to 5s~120m