1.  On the Allbluetooth page, enable batch group transfer. For devices that fail to transfer groups, display their MAC addresses.

2. Optimize connectivity to prioritize devices with PA.
3. Switch nodes before gateway Wifi connection, with a 30-second timeout to prompt failure.
4. Rename "IG Sensor Sync" to "Enable Sensors Sync".
5. For directly connected nodes with full signal strength: display 4 bars if the signal value is >-70, otherwise display 3 bars.
6. Fix the issue where the hold timecannot be set to infinity.
7. Add individual light switch on the allbluetooth page.
8. Hide the "transfer all groups" function.
9. Add single device network configuration mode.
10. In emergency single-device Manual test, filter other messages and only process the current MAC address.
11. Optimize some UI elements.

1.  Hide all group transfer and switch functions.

2.  Optimize OTA for non-directly connected devices.

V1.2.9

1. Restore the original calculation method for dim and maxtrim.

2. Modify to attempt 3 times after network configuration connection failure.

3. Add dim level and cct level titles.

4. Fix the issue where there is no head attribute when logging in to the server.

5. Gateway single control of WiFi account and password.

6. Optimize sensor parameter setting for null values; avatar upload refreshes immediately.

7. Optimize network configuration: attempt 3 reconnections after device addition fails, with an additional 1-second delay for every 50 devices.

8. User sidebar avatar.

9. Maximum 120 devices for batch group transfer (temporarily hidden).

10. Daily schedule distribution: scene expansion to 0-31, modify the order of sceneID commands.

1.  Add avatar upload functionality

2. Add version VID check for OTA

3. Add weekly schedule distribution
4. Modify the style of weekly schedule associated with daily schedule
5. Modify default names for building, area, etc.
6. Replace English terms according to HSE requirements
7. Modify the multi-line chart for measurement statistics (to be merged into a single line based on the selected area in subsequent updates)

8. Add number following for measurement slider

9. Optimize device cell style

10. Fix issue with adding in the upper right corner of schedules

11. Change daily repeat range to 1-14
12. Add build version number display for test versions
13. Add return pop-up for group transfer and scan code distribution scenarios
14. Add sensor individual control
15. Add building creation date display

16. Change quest to full clickable area

17. Add floor plan upload and download; add building role attribute

18. Add permission management: regular users cannot add, delete or modify area, zone and group

19. Modify OTA style

20. Add firmware

21. Add data to data statistics

22. Add new UI for individual control on allbluetoothnode page
23. Replace daily and weekly schedule icons
24. Force synchronization
25. Individual control interface and batch group transfer interface

26. Modify server

27. Add red dot style for OTA

28. Distinguish building permission colors: yellow for users, blue for administrators, white for super administrators

29. Modify terms

30. Add all functions to allbluetooth individual control page and batch group transfer
31. Add time synchronization time zone
32. Modify sharing: hide timing during loading
33. Modify names; add function to keep last zone when deleting zones

34. Modify network configuration text display

35. Add count of online/offline devices; add quantity display in pre-added list

36. Add avatar retrieval during login
37. Change onlinestatus relay response waiting time from 3s to 6s
38. Synchronize profile before generating QR code
39. Modify personal information interface UI
40. Add color temperature to onlinestatus
41. Optimize floor plan loading
42. Add select all and deselect all for all nodes
43. Optimize data page

1. Fix the crash issue when sharing on iPad

2. Modify parts of the weekly schedule
3. Adjust the layout
4. Modify to adapt to the layout (no buttons on small screens)
5. Add default building, area, zone and group

6. Data measurement for electricity statistics

7. Add individual control for metering devices, as well as brightness and switch status display

8. Export emergency power supply according to date

9. Display metering data by date* (unfinished)
10. Modify DH transmission
11. Modify CCT to send 0x1021
12. Add real-time refresh of device warning status in the manual test section of the group control page
13. Add tab switching memory for the group control page
14. Replace the repeat style for weekly schedules
15. Clear online status when switching areas

1. Fix the issue where the mask layer is displayed incorrectly when returning from the creation page when there are no buildings

2. Change the background color to blue when a lamp style is selected in Group

3. Replace group numbers with group names

4. Modify all add and delete pop-up windows

5. Add restrictions when building and area are empty

6. Modify the layout diagram interface and add photo upload functionality

7. Change "Lightcloud blue" to "HSE WISE" on the opening page

1. Modify the loading style according to the design drawing.

2. Update the photo upload function for the layout diagram.
3. Add restrictions when building and area are empty. 
   

1. Long-press on "All Node" to view its location.

2. For "Group Control": Enable dimming without releasing the brightness control (supports continuous dimming while holding); adjust the layout and style of the brightness control.
3. Add new alarm memory function.
4. Place offline devices at the top (of the list).
5. Modify time synchronization; automatically retrieve the version number.
6. Remove the default building, area, and group.
   

1. Modify the Bluetooth underlying encapsulation to fix the Bluetooth disconnection issue.

2. Add account deletion function; retain the account when logging out.
3. Add online status.
4. Add long-press to modify name and delete functions.
5. Modify the login interface and add a password modification interface.
6. Add password visibility toggle.